DescriptionKL2-0.8-70G Stationary anode X-Ray Tube is especially designed for intra-oral dental x-ray unit and available for a nominal tube voltage with self-rectified circuit. And it is a grid-control tube. The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode. It is extremely important to observe the connection diagram and the grid-resistor value. Any change could modify the dimensions of the focal spot, also varying diagnostic performances or overloading anode target. The high anode heat storage capacity ensures a wide range of applications for intra-oral dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.
|Nominal Tube Voltage||70Kv|
|Nominal Inverse Voltage||85kV|
|Nominal Tube Current||8mA|
|Maximum Exposure Times||3.2s|
|Maximun anode cooling Rate||210W|
|Max. Anode Heat Content||7.5kJ|
|Focal spot||0.8(IEC 60336 2005) At 70kV 8mA with 5kΩ to 25 kΩbias resister(Fixed)|
|Grid Resistance Value||recommended by manufacturer for any tube|
|Cathode type||W filament|
|Permanent Filtration||Min. 0.5mmAl/50 kV(IEC60522/1999)|
|Dimensions||.80mm length by 30mm diameter|
Competitive AdvantageElevated anode heat storage capacity and cooling Constant high dose yield Excellent lifetime
ApplicationsKL2-0.8-70G Stationary anode X-Ray Tube is especially designed for intra-oral dental x-ray unit and available for a nominal tube voltage with self-rectified circuit.